/* * OpenPOWER Romulus * * Copyright 2016 IBM Corp. * * SPDX-License-Identifier: GPL-2.0-or-later */ #include "qemu/osdep.h" #include "qapi/error.h" #include "hw/arm/machines-qom.h" #include "hw/arm/aspeed.h" #include "hw/arm/aspeed_soc.h" /* Romulus hardware value: 0xF10AD206 */ #define ROMULUS_BMC_HW_STRAP1 ( \ AST2500_HW_STRAP1_DEFAULTS | \ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ SCU_AST2500_HW_STRAP_UART_DEBUG | \ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) static void romulus_bmc_i2c_init(AspeedMachineState *bmc) { AspeedSoCState *soc = bmc->soc; /* * The romulus board expects Epson RX8900 I2C RTC but a ds1338 is * good enough */ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32); } static void aspeed_machine_romulus_class_init(ObjectClass *oc, const void *data) { MachineClass *mc = MACHINE_CLASS(oc); AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); mc->desc = "OpenPOWER Romulus BMC (ARM1176)"; amc->soc_name = "ast2500-a1"; amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1; amc->fmc_model = "n25q256a"; amc->spi_model = "mx66l1g45g"; amc->num_cs = 2; amc->i2c_init = romulus_bmc_i2c_init; mc->default_ram_size = 512 * MiB; aspeed_machine_class_init_cpus_defaults(mc); }; static const TypeInfo aspeed_ast2500_romulus_types[] = { { .name = MACHINE_TYPE_NAME("romulus-bmc"), .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_romulus_class_init, .interfaces = arm_machine_interfaces, } }; DEFINE_TYPES(aspeed_ast2500_romulus_types)