LoadBootstrapELF accepted __panic_state and __panic_code at the same
address, or as two words sharing bytes: the code's store would then also
set the guard, and nothing could tell the two apart. They must now be two
non-overlapping words of the data segment, like the other checks, before
any byte is written. BootstrapELFTest.PanicWordsMustNotAlias: the same
word and three partial overlaps, all inside the data segment, are
rejected; adjacent words are accepted. With the rule disabled, the test
fails. (StarOS MMU-001 review of F1.)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The ARM926EJ-S has one TLB for instructions and data, with lockdown
entries that whole-TLB invalidation preserves. Two comments said the
I and D TLBs were separate; they now say what the software TLB really
differs in: capacity and replacement (a direct-mapped cache of 4096
1 KiB granules), and lockdown, which is not modelled (c10 writes are
ignored). No code change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
StarOS's panic path (ADR-0014 R6) writes no trace line: it sets the guard
word __panic_state, stores __panic_code and halts. LoadBootstrapELF now
returns both symbols when an image has them (optional, but both or
neither, as words of the data segment), and the probe stops a run whose
guard is set: it prints the trace published so far and
"Starlet panic state <n> code <n>", and passes --expect-panic when the
state is 1. Images without these symbols (StarletOS) load and run as
before; a REV:PANIC trace line still satisfies --expect-panic.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ARMCore::SetMMUFaultsEnabled(true) makes the Starlet core deliver the
faults of the ARM926EJ-S MMU instead of the identity fallback:
- translation (section 0x5, page 0x7), domain (0x9, 0xb) and permission
(0xd, 0xf) faults from the descriptors, the DACR (no access and the
reserved value fault; manager skips AP) and AP with the S and R bits;
ARMv5 has no execute permission, so a fetch needs read permission;
- data aborts (vector 0x10, LR = instruction + 8 in both states) set the
FSR and the FAR (the MVA); prefetch aborts (vector 0x0c, LR + 4) set the
IFSR (c5 opcode2 1) and leave the FAR unchanged;
- alignment faults (0x1) when control bit A is set;
- base-restored data aborts: the first faulting access ends the
instruction's bus traffic and its register results are undone; words
stored before the fault stay written;
- LDRT/STRT/LDRBT/STRBT check User permissions in any mode;
- the TLB keeps each granule's domain and AP, never caches a faulting
walk, and c8 single-entry operations drop only the page that maps the
MVA, so an entry stays stale until the guest invalidates it;
- MRC/MCR to CP15 from User mode is an undefined instruction.
The JIT stays usable: with the option on, every block entry goes through
C++, which checks the fetch under the current mode and DACR, and only
instructions that touch neither memory, CP15, the PSRs nor the exception
model run natively; the rest use the interpreter.
Off by default. The IOS LLE path keeps its identity fallback, its
savestate format (the option and the IFSR are not serialized) and its
idle-loop fast-forwarding; the only change there is that the data
accessors read one abort flag that stays clear.
20 StarletARMCoreMMUFaults tests, each run in the interpreter and the
JIT; the existing Starlet tests pass unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SMLAxy, SMLAWy, SMULWy, SMLALxy, SMULxy, QADD, QSUB, QDADD and QDSUB were
decoded as compare data processing that writes no register; the ARM926EJ-S
implements them. The interpreter now executes them with the Q flag and the
JIT leaves them to it. Adds ARMv5TEEnhancedDSPInstructions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Reads and IPC-reply audits compare each watched range with what the
Starlet and the devices wrote, revealing other writers; register-list
transfers in a watched virtual range log their translation.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Logs Starlet CPU stores (instruction address, LR) and device DMA writes
in the given physical ranges. The ARM JIT keeps fastmem but sends accesses
overlapping a watched range to its bus slow path, recording the
instruction address there. Nothing changes without the variable.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With REV_BOOTSTRAP_WIIMOTE=1 a bootstrap-ELF session gets the emulated Wii
Remotes of the original-IOS mode, using the identities paired in the
attached NAND's SYSCONF. The NAND is never rewritten for it; without the
variable nothing changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With DOLPHIN_IPC_TRACE=1 and the original IOS on the emulated Starlet, log
each request Broadway posts (X1: command, descriptor, argument words, an
OPEN's path) and each reply Starlet posts (Y1: original command, result).
Buffer contents are never read; nothing changes without the variable.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Recover 16 modified and 6 previously untracked integration files. All 22 source SHA-256s match the pre-publication StarletOS snapshot. Add handoff instructions, byte-preserving attributes and private backup exclusion. This commit publishes existing behavior; it does not claim a new full build or hardware qualification. The two preceding local commits and staged files were screened before publication.
Add opt-in AX88772 Ethernet with libslirp NAT, pinned Windows runtime setup and USB/network regressions. Correct Hollywood DI/reset interrupt routing and physical SRAM DMA for AES, SHA, NAND, SDIO and OHCI. Keep aligned Thumb bus accesses inside native JIT blocks.
Validated: 164 targeted tests pass. User confirmed Wii Shop connection and channel-list navigation at 100% speed / 59.96 FPS on 2026-09-12. Downloads and general channel performance remain unvalidated; local firmware, keys and runtime data are excluded.
Save the remaining ARM JIT and MMU/cache optimizations, accurate Starlet timer and Wiimote report cadence, opt-in PPC event tracing, and full texture hashing in the LLE launcher. Include regression coverage and exclude local profiling artifacts.
Validation: 127 targeted tests from 15 suites passed, with one disabled test. Includes the current user-tested source state following the persistent NAND milestone.
Keep the source dump immutable and replay checksummed copy-on-write transactions from the active user profile. Persist program, erase, pairing and restored snapshot writes. Preserve interrupted tails before recovery and reject corrupt journals or concurrent writers.
Validated in the current build with 127 targeted tests and a user-confirmed channel deletion surviving process exit and restart; 2944 saved NAND pages reloaded successfully.
Retain ARM926 FCSE translations, accelerate common Starlet JIT blocks and cache sparse Hollywood register reads. Inline the hot Broadway write-back cache path while preserving exact cache miss, locking and split-access behavior.
Boot original Wii firmware through boot0, boot1, boot2 and IOS on an emulated ARM Starlet. Model the required IPC, memory, SD, USB and Bluetooth hardware behavior, including IOS reload into IOS58, and add focused tests, launch utilities and architecture documentation.
Independently spotted by both @Dentomologist and me while reviewing
PR #14805
The previous limit was correct for valid VPBs, but an invalid VPB
controlled by a malicious game could contain a non-fractional value
in current_pos_frac, which would allow writing an extra 15 samples
(30 bytes) into the stack. With AFC encoding, this is rounded up to 16
samples, but with much less control over which bytes are written.
Maybe we should be doing some validation, or bounds checking, but I'm
pretty sure this issue was copied from the original ucode, and we kinda
want to stay compatible.
The simpler fix is to just increase the size of raw_input_samples.
I've checked other code paths, and 0x514 samples seems to be the limit.
glMemoryBarrier comes from ARB_shader_image_load_store, so on a desktop context
below GL 4.2 the pointer is null. bSupportsBBox is set from
bSupportsFragmentStoresAndAtomics, which such a driver can still have, so saving
a state reads the bounding box and calls a null pointer.
UsePersistentStagingBuffers() in OGLTexture.cpp already guards the same call with
bSupportsImageLoadStore.
msg_in and msg_out were ending up with only 4-byte alignment, which
is undefined behaviour, since they contain 64-bit fields. Probably
doesn't cause any issues, but it showed up in ubsan.
Yaya48andClaude Opus 5.5
OatmealDome
Admiral H. Curtiss
Martino Fontana
DacoTaco
Dr. Dystopia
Scott Mansell
Tillmann Karras
JosJuice
Dentomologist
Andy1210
dreamsyntax
Sepalani