This commit changes devices to always return IPCCommandResult rather
than just a return code for Open() and Close() in order to be able
to better emulate reply timing.
In hindsight, I should have considered we would want to emulate
timing when I cleaned up the device interface, but alas.
This rectifies that mistake.
Whenever udev_monitor_receive_device() returns a non-null pointer,
the device must be unref'd after use with udev_device_unref().
We previously missed some unref calls for non-evdev devices.
It's not guaranteed that the eventfd is smaller than the monitor fd,
because fds are not always monotonically allocated. To select()
correctly in all cases, use the max between the monitor fd and eventfd.
Some homebrew expect exception handlers to be present -- which is
almost always the case on console, since most of the time homebrew are
launched from either a libogc or SDK title) -- and break if they are
not. To fix this, we just need to include default, dummy handlers.
Set HID0, HID4, GPR1 to values that are used by libogc for
initialisation. This makes boots more similar to a launch
from the HBC or another loader, since normally the registers
have already been initialised by the loader.
This fixes a crash in homebrew that assume GPR1 points to a correct
location and attempt to use it before initialising registers.
Currently, a simple typo in the system name will trigger an assert
message that complains about a "programming error". This is not
user friendly and misleading.
So this changes GetSystemFromName to return an std::optional, which
allows for callers to check whether the system exists and handle
failures better.
Manually convert each argument to a UTF-8 std::string, because the
implicit conversion for wxCmdLineArgsArray to char** calls ToAscii
(which is obviously undesired).
Fixes https://bugs.dolphin-emu.org/issues/10274
Unlike VEN, the endpoint is determined by the value at 8-12.
If it's non-zero, HID submits the request to the interrupt OUT
endpoint. Otherwise, the request is submitted to the IN endpoint.
This commit changes HIDv5 to keep track of endpoints (like IOS does)
and use them when submitting interrupt transfers.
This implements /dev/usb/hid v5, found in IOS57, IOS58 and IOS59.
This is an initial implementation that ignores some differences
with VEN because I lack understanding of what IOS is actually doing
sometimes. These are documented on the WiiBrew article:
https://wiibrew.org/wiki//dev/usb/hid_(v5)
One major difference that this implementation handles is about IDs.
It turns out Nintendo has decided to include the interface number in
the top byte of HIDv5 device IDs, unlike VEN -- even though everything
else about ioctl 1 is otherwise the same!
USBv5 IOS resource managers share most of their code. Some ioctls
are even completely the same! So let's separate the common code
from the VEN specific stuff to make HIDv5 easier to implement.
The descriptor copy code is not actually the same in HIDv4 and VEN,
so it did not make a lot of sense to put it in USB/Common.cpp.
Separate and move it to HIDv4 and VEN.
This cleanup is important because there are even more differences
between HIDv4 and HIDv5.
Fix the device ID struct to reflect the actual structure used by IOS.
It turns out that offset 2 is the internal device index. The reason
that field seemed to be "0x1e - interface_number" is that IOS only
keeps track of 32 devices and always looks for free entries from
the end of the internal array. With each USB interface being exposed
as a separate USBv5 device, "0x1e - interface_number" was mostly
correct... but wrong!
We also made the assumption that the interface number can be
identified from just a USBV5 device ID, which is definitely not true.
VEN (and HID) keep track of the interface number in the internal struct
instead of "reconstructing" it from the device ID (which is normally
not possible if we were generating IDs correctly)
This commit fixes all of these inaccuracies.
It is not possible to tell whether DLC contents are supposed to be
present on the NAND or not, because they're treated as "optional".
So this commit changes the NAND check to not consider missing
contents for DLC titles as an issue.
Use std::string(cstring, strnlen(cstring, max_length)) instead of
trying to remove extra null characters manually, which is a bit
ugly and error prone.
And indeed, the original code contained a bug which would cause
extra NULLs to not be removed at all if the string did not
end with a NULL -- causing issues down the road when constructing
paths for sub-entries.
Because the Wii NAND size is finite, mark titles that were installed
only for booting as temporary, and remove them whenever we need to
install another title (to make room). This is exactly what the
System Menu does for temporary SD card title data.
Also clean up the way the system menu label is updated. We don't want
to access the NAND while emulation is running, and especially not
that many times per second on an unpredictable timing.
This commit removes the last usage of NANDContentManager in IOS code.
Another cleanup change is that loading ARM (IOS) binaries is now done
by the kernel in the BootIOS syscall, instead of being handled as a
special case in the MIOS code. This is more similar to how console
works and lets us easily extend the same logic to other IOS binaries
in the future, if we decide to actually load them.
This removes the hack that enables directly booting from WADs
without installing them first for the following reasons:
1. It makes the NAND content handling much more complicated than what
it should be and makes future changes like permissions or booting
NAND titles without a WAD more annoying to implement.
Because of this hack, we needed an extra level of abstraction
(NANDContent*) which has to read tons of things from the NAND, even
most of the time it's useless. This in turn forces us to have
caching, which is known to break titles and requires manual cache
invalidations. Annoying and error prone.
2. It prevents the WAD boot code from being easily accurate. With this
change, we can simply reuse the existing launch code, and ask IOS
to launch the title from the NAND.
3. The hack did not work that well since it did not cover a lot of ES
commands. And it works even less since the ES accuracy fixes.
This results in Dolphin returning inconsistent results: a
lot of the ES "DI" commands will just fail because the active title
is not installed on the NAND. uid.sys is not changed, etc.
And I'm not even talking about FS stuff -- where this would still
totally fail, unless we add even more unnecessary hacks.
This is not just theoretical -- the system menu and the Wii Shop are
known to behave strangely because the hack damages the NAND
structure, and we've already had several users report issues.
This commit makes it so WADs are always installed prior to launching.
A future commit will remove any code that was there only for the hack.
Fixes a regression which broke running several Dolphin instances at the
same time on Windows. Thanks to exjam for spotting the issue
pretty much immediately. Sorry about that!
Also changes the file names to be more consistent on all platforms.
Change the repair logic to fix issues more aggressively by deleting bad
titles. This is necessary because of a bug in Dolphin's WAD boot code.
The UI code was updated to inform the user about titles that will be
deleted if they continue a repair, before deleting anything.
Old versions of Dolphin are so broken regarding NAND handling that
we need this to repair common issues and avoid issues with titles
like the System Menu or the Wii Shop.
This isn't an exhaustive check, but this will catch most issues
and offer to fix them automatically (if possible).
The newer title dumpers don't clobber tickets anymore (that's good!),
which means personalised tickets still have the console specific data
used to decrypt the title key in them. Dolphin should ignore that data
when importing WADs, because the title key has already been decrypted,
and we must not try to decrypt it *again*.
Makes the toolbar look more comfortable instead of all squished
together, and more similar to our current look.
Instead of setting a hardcoded minimal size for buttons, MakeActions()
now uses the maximum size hint width.
* remove useless units after 'zero' values
* reduce the size of 'Dolphin' to be more reasonable and look better
* avoid hardcoding the normal and small font sizes
Just create the AboutDialog on the stack -- the actual object lives on
the heap anyway, since Qt uses the pimpl idiom. Removes the need for
an explicit new and a special delete on close attribute.
There are two special cases that the DSP accelerator handles in a
special way: when the end address is of the form xxxxxxx0 or
xxxxxxx1.
For these two cases, the normal overflow handling doesn't apply.
Instead, the overflow check is different, the ACCOV exception never
fires at all, the predscale register is not updated, reads are not
suspended, and if the end address is 16-byte aligned, the DSP loops
back to start_address + 1 instead of the regular start_address.
When an ACCOV is triggered, the accelerator stops reading back anything
and updating the current address until the YN2 register is set.
This is kept track of internally by the DSP; this state is not exposed
via any register.
However, we need to emulate this behaviour correctly because some
ucodes rely on it (notably AX GC); failure to emulate it will result
in reading past the end and start address for non-looped voices.
When the current address is xxxxxxxf, after doing the standard ADPCM
decoding and incrementing the current address as usual to get the
next address, the DSP will update the predscale register by reading
2 bytes from memory, and add two to get the next address.
This means xxxxxx10 cannot be a current address, as the DSP goes
from 0f to 12 directly.
A more serious issue with the old code is that if the start address
is 16-byte aligned, some samples will always be skipped, even when
that should not be the case.
An easy way to test whether this behaviour is correct is to check
the current address register and the predscale after each read.
Old code:
...
ACCA=00000002, predscale=<value>
ACCA=00000003, predscale=<value>
...
ACCA=0000000f, predscale=<value>
ACCA=00000010, predscale=<another value>
ACCA=00000013, predscale=<another value>
ACCA=00000014, predscale=<another value>
...
New code (and console):
...
ACCA=00000002, predscale=<value>
ACCA=00000003, predscale=<value>
...
ACCA=0000000f, predscale=<value>
ACCA=00000012, predscale=<another value>
ACCA=00000013, predscale=<another value>
...
Slightly cleaner, allows DSP accelerator behaviour to be
added to both HLE and LLE pretty easily, and makes the accelerator
easier to unit test.
I chose to include all accelerator state as private members, and
to expose state that is accessible via registers with getters/setters.
It's more verbose, yes, but it makes it very clear what is part of
the accelerator state and what isn't (e.g. coefs).
This works quite well for registers, since the accelerator can do
whatever it wants internally. For example, the start/end/current
addresses are masked -- having a getter/setter makes it easier to
enforce the mask.
This adds a test ucode that can be used to check the accelerator loop
behaviour with various start/end addresses.
It's actually more of a test template than a ready to use test.
The logic is entirely the same; only the inputs and outputs are
different, so deduplicating makes sense.
This will make fixing accelerator issues easier.
Based on hardware tests, masking occurs for the accelerator registers.
This fixes Red Steel and Far Cry Vengeance, which rely on this behavior
when reading back the current playback position from the DSP.
Prevents resource managers that shouldn't be visible from being exposed
to titles.
This adds a new function to get features for an IOS version, and also
moves the version checks from the modules themselves to VersionInfo.
This hopefully documents some of the differences between IOS better
and should be slightly cleaner than having random version checks.
Léo Lam