The newer title dumpers don't clobber tickets anymore (that's good!),
which means personalised tickets still have the console specific data
used to decrypt the title key in them. Dolphin should ignore that data
when importing WADs, because the title key has already been decrypted,
and we must not try to decrypt it *again*.
There are two special cases that the DSP accelerator handles in a
special way: when the end address is of the form xxxxxxx0 or
xxxxxxx1.
For these two cases, the normal overflow handling doesn't apply.
Instead, the overflow check is different, the ACCOV exception never
fires at all, the predscale register is not updated, reads are not
suspended, and if the end address is 16-byte aligned, the DSP loops
back to start_address + 1 instead of the regular start_address.
When an ACCOV is triggered, the accelerator stops reading back anything
and updating the current address until the YN2 register is set.
This is kept track of internally by the DSP; this state is not exposed
via any register.
However, we need to emulate this behaviour correctly because some
ucodes rely on it (notably AX GC); failure to emulate it will result
in reading past the end and start address for non-looped voices.
When the current address is xxxxxxxf, after doing the standard ADPCM
decoding and incrementing the current address as usual to get the
next address, the DSP will update the predscale register by reading
2 bytes from memory, and add two to get the next address.
This means xxxxxx10 cannot be a current address, as the DSP goes
from 0f to 12 directly.
A more serious issue with the old code is that if the start address
is 16-byte aligned, some samples will always be skipped, even when
that should not be the case.
An easy way to test whether this behaviour is correct is to check
the current address register and the predscale after each read.
Old code:
...
ACCA=00000002, predscale=<value>
ACCA=00000003, predscale=<value>
...
ACCA=0000000f, predscale=<value>
ACCA=00000010, predscale=<another value>
ACCA=00000013, predscale=<another value>
ACCA=00000014, predscale=<another value>
...
New code (and console):
...
ACCA=00000002, predscale=<value>
ACCA=00000003, predscale=<value>
...
ACCA=0000000f, predscale=<value>
ACCA=00000012, predscale=<another value>
ACCA=00000013, predscale=<another value>
...
Slightly cleaner, allows DSP accelerator behaviour to be
added to both HLE and LLE pretty easily, and makes the accelerator
easier to unit test.
I chose to include all accelerator state as private members, and
to expose state that is accessible via registers with getters/setters.
It's more verbose, yes, but it makes it very clear what is part of
the accelerator state and what isn't (e.g. coefs).
This works quite well for registers, since the accelerator can do
whatever it wants internally. For example, the start/end/current
addresses are masked -- having a getter/setter makes it easier to
enforce the mask.
This adds a test ucode that can be used to check the accelerator loop
behaviour with various start/end addresses.
It's actually more of a test template than a ready to use test.
The logic is entirely the same; only the inputs and outputs are
different, so deduplicating makes sense.
This will make fixing accelerator issues easier.
Based on hardware tests, masking occurs for the accelerator registers.
This fixes Red Steel and Far Cry Vengeance, which rely on this behavior
when reading back the current playback position from the DSP.
* IOCTL_WFSI_PREPARE_DEVICE -> IOCTL_WFSI_IMPORT_TITLE_INIT
(equivalent of ES_ImportTitleInit, also the official name)
* IOCTL_WFSI_IMPORT_TITLE -> IOCTL_WFSI_IMPORT_TITLE_CANCEL
(equivalent of ES_ImportTitleCancel)
Makes it easier to turn off general IOS messages that can be
distracting (e.g. /dev/net/ssl being opened hundreds of time...)
without losing the ability to view WFS messages.
Since we don't want users to have to configure the region manually
and always enforce one automatically, we should fall back to a region
that was likely to be chosen by the user instead of always using
PAL whenever the title region cannot be detected.
Dolphin doesn't mess with installed NAND titles like the system menu,
so it is a reliable indicator of what region the user wants.
* Add missing Language setting loading/saving. This was added after the
original OnionConfig PR, which is why support for it was missing.
* Change MovieConfigLoader to reuse ConfigInfos. Less duplication.
* Extract MovieConfigLoader::Save into SaveToDTM. The DTM should use
the current config and not just the movie layer. This makes more
sense than just saving the movie layer, which may not always exist,
and also fixes a crash that would happen when creating a new
recording because the movie layer wouldn't exist in that case.
(Plus, having to get the loader from the layer and call ChangeDTM
on it manually is not very pretty.)
Not really used anywhere yet, but useful for not having to duplicate
config locations and for getting rid of conflicts when I get around
to rebase my Main.Core and Main.DSP porting PR.
Settings that come from the SYSCONF are now included in Dolphin's
config system as part of the base layer. They are handled in a
special way compared to other settings to make sure they are only
loaded from and saved to the SYSCONF (to avoid different, possibly
contradicting sources of truth).
This adds a WiiWad constructor that takes a BlobReader, so that the
class can be used with more than just files from the host filesystem.
Required for using WiiWad with WADs from update partitions.
Must be 9 characters at most; otherwise the serial number will be
rejected by SDK libraries, as there is a check to ensure the string
length is strictly lower than 10.
Writing to 0x60 does actually not "init exception[s]" or anything like
that. Not at all. Rather, it *breaks* a check in Nintendo's SDK, which
makes it fail to realise that the hook hasn't been set up.
This prevents the SDK initialisation routines from writing the rest of
the hook instructions (total: 0x20 bytes), which in turn causes an
anti-piracy check to fail in some Ubisoft games (including Tintin).
Dolphin can be really amazing sometimes.
No clue where people got the 0 value from, or why it's labelled as
"time". As far as I can tell, it is always set to 0xffffffff by
official NAND titles, including the system menu.
It's not specific to WADs. The BS2 emulation boot code will also need
to update the state file.
Move the struct to Boot and add a helper function that will handle
reading + computing the checksum + writing the state file.
Wii.Widescreen is a setting that cannot be changed on the fly after
emulation has started, so anything booted after the initial title
will have an unexpected aspect ratio.
We can just set Video_Settings.AspectRatio instead, which *can* be live
changed, since it doesn't involve messing with the SYSCONF at any time.
This is also much closer to the behaviour of the Wii U, which
configures the DMCU to force 4:3 transparently, instead of doing it the
intrusive way (touching the SYSCONF).
The Config::AddLoadLayer functions call Load on the layer
explicitly, but Load is already called in the constructor,
so they'd cause the loader's Load function to be called twice,
which is potentially expensive considering we have to read an INI
from the host filesystem.
This commit removes the Config::AddLoadLayer functions because
they don't appear to be necessary.
On Windows, File::GetTempFilenameForAtomicWrite returns a path
somewhere in C:\Users\XXX\AppData\Local\Temp\{UUID here}\
in which all writes just fail.
Just use the SYSCONF path + ".tmp" for the temporary file name.
* -Wno-unused-but-set-variable: only set this flag with gcc, otherwise
clang will issue warnings about the warning option being unknown :)
(-Wunknown-warning-option)
* -Wmissing-variable-declarations: clang warns about missing extern
declarations for non-static variables.
The section is 0x461 bytes long, not 0x460. The config data is also now
initialised to zero to avoid garbage being written to the SYSCONF.
Because our handling has been wrong forever, we discard older BT.DINF
section backups as using them would result in the section being the
wrong size / incomplete again.
It turns out that the last byte of array entries isn't unused (as we
thought); instead, it looks like it's actually part of the main data,
and the length stored next to the name is in fact the length minus one.
Getting it wrong and always storing a null byte in there won't affect
most entries (since the last byte is zeroed most of the time), except:
- IPL.NIK: the length is stored in the last byte, and it must be kept.
- BT.DINF: u8 unknown[0x45] should be another Bluetooth device entry.
- Possibly other unknown affected entries.
I don't know who thought it would be a good idea to put the Wiimote
connect code as part of the Host interface, and have that called
from both the UI code and the core. And then hack around it by having
"force connect" events whenever Host_ConnectWiimote is called
from the core...
BluetoothEmu had its own bdaddr_t type which is a old style C struct
and typedef, which makes comparisons and copies a bit ugly.
On the other hand, BTReal had its own btaddr_t type using std::array.
To make things very slightly nicer, this commit changes the Bluetooth
code to use a single type (std::array<u8, 6>) for all BT addresses.
Imports/exports don't always use the title key. Exporting a title and
importing it back uses the PRNG key (aka backup key handle or key #5),
not the title key (at all).
To make things even more fun, some versions of IOS have a bug that
causes it to use a zeroed key instead of the PRNG key. When Nintendo
decided to fix it, they added checks to keep using the zeroed key only
in affected titles to avoid making existing exports useless.
(Thanks to tueidj for drawing my attention to this.
I missed this edge case during the initial implementation.)
This commit implements these checks so we are using the correct key
in all of these cases.
We now also use IOSC for decryption/encryption since built-in key
handles are used. And we now reject any invalid common key index,
just like ES.
Core::PauseAndLock requires all calls to it to be balanced, like this:
const bool was_unpaused = Core::PauseAndLock(true);
// do stuff on the CPU thread
Core::PauseAndLock(false, was_unpaused);
Aside from being a bit cumbersome, it turns out all callers really
don't need to know about was_unpaused at all. They just need to do
something on the CPU thread safely, including locking/unlocking.
So this commit replaces Core::PauseAndLock with a function that
makes both the purpose and the scope of what is being run on the
CPU thread visually clear. This makes it harder to accidentally run
something on the wrong thread, or forget the second call to
PauseAndLock to unpause, or forget that it needs to be passed
was_unpaused at the end.
We also don't need comments to indicate code X is being run on the
CPU thread anymore, as the function name makes it obvious.
Showing the Wii remote connection status leads to inconsistent UX,
because we don't do anything like that for GameCube controllers
or with Bluetooth passthrough.
It's also questionable how useful it is given that:
* it doesn't print the number of connected remotes, just that one
remote is connected, connecting or not connected, so the only info
it provides is actually wrong when using multiple remotes;
* this user-facing feature is actually broken in master and no one has
complained AFAIK, which means people don't really rely on it;
* the status bar isn't visible most of the time unless the user is
using render to main or deliberately keeping the main window's
status bar visible by moving the render window and they're not too
far away from their screen;
* emulated Wii remotes now reconnect on input, which means that there
is less of a need to actually know at all times whether a remote
is connected, since pressing any button will reconnect it and provide
immediate, visible feedback via OSD messages and the Wii remote
pointer appearing.
Tracking a buffer's size manually and storing it under a name that
does not make it obvious it is related to the buffer is really... meh.
Also gets rid of the need to manually manage its capacity and
new/delete an array.
This commit merges the import and export contexts into a single context
because this is what IOS does, which means we can only reproduce its
behaviour correctly if we use a single context for both operations.
The other reason is that having two separate and very similar structs
is not really a good idea.
While working on this commit, I was notified that our handling of
ImportTmd/ExportTitleInit is not correct. In particular, we always use
the title key for both importing and exporting, which is wrong. To make
this easier to fix in a follow-up PR, the context now also has a title
key field, just like ES. This also lets us avoid computing it every
single time in ImportContentDone.
Léo Lam