* Added HLE function IsBusyStream which signals that the Wiimote is ready to accept speaker data. This function is not a conversion from the real PPC code. It a simple function that returns the "ready" status after being polled.
* Added code to find and patch HLE functions on boot
* Added 4bit Yamaha ADPCM decoder from the ffmpeg project
* Removed some test code
* Added some copyright notices
Fixes issue 438.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7225 8ced0084-cf51-0410-be5f-012b33b47a6e
Changes:
* Allow events to be scheduled when the emulator is not running. This allows the save state event to be added before the emulator starts.
* Removed the Audio back-end init flag from the save state. This value should not be saved as it is not data relevant to guest machine.
* Allow a recording to be started at any time (apart from when a recording is already being made).
* Updated the status bar and title bar when an on-screen message is shown
* Removed the saving of PEToken from the save state as the FIFO will save this information
* Added a couple Pixel Engine interrupt states to the save state
* Added the copyright notice to the GCPadStatus.h file.
This function is preliminary. Let us know of any bugs you find or any UI quirks.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7175 8ced0084-cf51-0410-be5f-012b33b47a6e
* Tightened the timing between the CPU and the DSP in thread mode so that it works closer to how the non-threaded mode works. The CPU now waits for all of the DSP cycles to be exhausted before adding more cycles.
* DSP Idle skipping has been disabled as it messes up the timing when it is running in a thread.
* Checked for external interrupt requests before entering the dispatcher and inside the dispatcher loop
* Added a critical section around the mailbox read high function
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@7040 8ced0084-cf51-0410-be5f-012b33b47a6e
* Optimised out the R11 ImmPtr instructions
* Made the whitespacing a little more consistent
* Disabled block linking while it is being reworked
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6688 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed a bug in the JCC instruction.
* Changed the cycle count from u32 to u16.
* Added cycle counting to the block linker.
* Optimised the branch exit slightly.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6681 8ced0084-cf51-0410-be5f-012b33b47a6e
* Completed the JIT versions of the DSP Multiplier instructions (5 instructions added).
* Bug fixed the dec and lsr16 instructions.
* Minor code clean-up.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6657 8ced0084-cf51-0410-be5f-012b33b47a6e
* Completed the JIT versions of the DSP arithmetic instructions (28 instructions added).
* Added JIT versions of maddx and msubx (thanks to LM1234).
x64 only
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6652 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added 21 Arithmetic instructions to the JIT
* Used the DSPAnalyser to identify arithmetic/multiplier instructions that precede a conditional branch. This allows the JIT to skip updating the SR when nothing would read from it. Marked all arithmetic/multiplier instructions in the DSPTable for this purpose.
* Converted CheckExternalInterrupt into ASM
* Fixed a couple instructions in DSP Load/Store
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6633 8ced0084-cf51-0410-be5f-012b33b47a6e
* Added jit versions of 5 DSP LoadStore instructions: srs, lrs, lr, sr, si
* Renamed MainOpFallback to Default for consistency in naming with JIT64
* Made ext_dmem_read and ext_dmem_write more generic for wider use
* Optimised dmem_read and dmem_write slightly
* Added dmem_read_imm and dmem_write_imm optimised versions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6596 8ced0084-cf51-0410-be5f-012b33b47a6e
* Optimised the updating of g_dsp.pc in the compile loop (code by kiesel-stein)
* Added JIT version of LRI (code by kiesel-stein)
* Added JIT versions of the branch instructions (code by Jack Frost)
* DSP_SendAIBuffer fix (code by Mylek)
* Marked instructions that update g_dsp.pc in the DSP table and updated PC based on the table (speed up)
* Fixed the signed bits not being set properly in the addr instruction
* Created a MainOpFallback function to use interpreted versions of the instructions if necessary (code by kiesel-stein)
* Disabled the jit versions of subarn and addarn as they are slowing down NSMBW
The above work in both x86 and x64 modes.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6582 8ced0084-cf51-0410-be5f-012b33b47a6e
the black screen in Sonic Colours. Both JIT and JITIL have this work-around.
Re-enabled ps_mul as that instruction was not the root cause.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6565 8ced0084-cf51-0410-be5f-012b33b47a6e
The finding was that 99% of the time, textures are static in memory. However, Dolphin would pessimistically continue to decode and copy the same texture every time. The optimisation is to check if the texture matches what is in the cache, and if it does, Dolphin should early exit.
The result is the speed in New Super Mario Bros Wii increased 35% with spinning coins. Still not as fast as EFB copy to texture though.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6352 8ced0084-cf51-0410-be5f-012b33b47a6e
The "Enable Progressive Scan" option in the Wii menu now controls whether the Wii/GC will detect a progressive scan display. This affects the timing of some games (both GC and Wii). Usually, the checkbox should be unticked as progressive scan displays require higher bandwidth.
This fixes the slow speed in NBA JAM. This also fixes the hang in Megaman Network Transmission. This should fix Deadly Creatures (turn off progressive scan).
Fixes issue 3314.
Fixes issue 3066.
Fixes issue 2571.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6297 8ced0084-cf51-0410-be5f-012b33b47a6e
Added disc access time emulation
Enabled the disc transfer speed by default
Changed the system timing back to the pre-r6090 default (thanks to tsilibourditsas for testing)
Changed the game property to "Speed up disc transfer rate". Leave this disabled for the most compatible setting.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6284 8ced0084-cf51-0410-be5f-012b33b47a6e
Renamed EFB Scale to Internal Resolution.
Removed Auto Scale option (it is now always on).
Added on-the-fly changing of the Internal Resolution in the OpenGL and Direct3D9 plug-ins.
Further consolidated the code in the video plug-ins.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6240 8ced0084-cf51-0410-be5f-012b33b47a6e
First step to bring a level of consistency between the video plug-ins - variable names, spacing, function names, function order, comments, file names. This will help us identify common code for VideoMerge.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6235 8ced0084-cf51-0410-be5f-012b33b47a6e
* Fixed the "Change disc..." command. The filename of the disc was being lost between functions.
* Split the ChangeDisc function into two functions: EjectDisc and InsertDisc
* Moved the "Change disc..." command to the File menu.
* Removed some log messages that caused the debug build to crash when loaded with release build plug-ins.
Fixes issue 3036.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6206 8ced0084-cf51-0410-be5f-012b33b47a6e
After launching a channel, the wiimote has to be disconnected and reconnected for it to work. The same also has to be done when returning back to the menu.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6202 8ced0084-cf51-0410-be5f-012b33b47a6e
* Implemented HID4.SBE flag
* Implemented but disabled MSR[IR] and MSR[DR]
* In-lined ISI exception calls
* Fixed and verified exception handling according to docs
* Code clean-up in the memory functions
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6199 8ced0084-cf51-0410-be5f-012b33b47a6e
Fixed the interpreter to execute instructions in the right number of cycles. It used to execute all instructions in one cycle.
Added a trace function to the interpreter making it easier to determine differences between the interpreter and the recompilers.
Removed the "Enable self modifying code check" as it was not useful.
Fixes issue 2407.
git-svn-id: https://dolphin-emu.googlecode.com/svn/trunk@6183 8ced0084-cf51-0410-be5f-012b33b47a6e
skidau