This lets Dolphin know if a configured GameCube Controller should actually
be treated as connected or not.
Talked to @JMC47 a bit about this last night. My use-case is that all of
my controllers are the same hardware (Xbox One controllers) so share the
same configuration (modulo device number). Treating them all as always
connected isn't a problem for most games, but in some (Smash Bros.) it
forces me to go find a keyboard/mouse and unconfigure any controllers
that I don't actually have connected. Hotplugging devices (works on macOS,
at least) + this patch remove my need to ever touch the Controller Config
dialog while in a game.
This patch makes the following changes:
- A new `BooleanSetting` in `GCPadEmu` called "Always Connected", which
defaults to false.
- `ControllerEmu` tracks whether the default device is connected on every
call to `UpdateReferences()`.
- `GCPadEmu.GetStatus()` now sets err bit to `PAD_ERR_NO_CONTROLLER` if
the default device isn't connected.
- `SIDevice_GCController` handles `PAD_ERR_NO_CONTROLLER` by imitating the
behaviour of `SIDevice_Null` (as far as I can tell, this is the only use
of the error bit from `GCPadStatus`).
I wanted to add an OSD message akin to the ones when Wiimotes get
connected/disconnected, but I haven't yet found where to put the logic.
- coef: Explicitly set 23 different values that are used by GBA UCode,
and tweaked overall parameters to more closely match those 23 values.
- irom: Moved a few functions to their proper places, updated BootUCode
to configure DMA transfers using AX registers as well as IX registers
(the GBA UCode uses this to do two sequential transfers in one call),
and added partial functions used by GBA UCode.
All functions were reverse-engineered solely based off of observed
effects on the virtual machine: register states before-and-after, dmem
interactions, and DMA transfers. The specific coefficients were observed
being read from dmem, and must be exactly those values to function
properly. I have no knowledge of how the official ROM implements these
functions, or how it is implemented overall.
Tested with The Legend of Zelda: Four Swords Adventures, Final Fantasy
Crystal Chronicles, and Billy Hatcher and the Giant Egg (to download
ChuChu Rocket!).
`P_REG1C` had the same value as `P_ACCL`, so was causing spurious errors
when used with ACCM registers. Gcdsptool (which calls this `P_ACCLM`)
gives it the value `P_REG | 0x1c10` instead, and handles errors in the
same block as other REG## enums.
`MainWindow` initializes a number of input interfaces but never shuts
them down. This was causing a crash-after-exit on macOS where the
ControllerInterface backend stores a `std::thread` object in a static
variable and only stops it when ControllerInterface::Shutdown is called.
FormLayout is not intended for this sort of dialog:
> QFormLayout is a convenience layout class that lays out its children
> in a two-column form. The left column consists of labels and the right
> column consists of "field" widgets (line editors, spin boxes, etc.).
Use @Orphis's FindFFmpeg module from ppsspp:
https://github.com/hrydgard/ppsspp/commit/2149d3db7fb960d140bdee31a9f0f4837934127b
From that commit:
> This new module should be able to handle both libraries in the regular
> paths and fallback to pkg-config.
> It is also able to find dynamic libraries, not just static libraries.
> It will generate imported targets with the name FFmpeg::<lib> that you
> can use in your scripts.
The current prefixing makes it harder to build test executables directly
from the command line, since the target name breaks CMake convention and
doesn't match the name passed to `add_dolphin_test`. They all have "Test"
somewhere in the name anyways.
This adds the WARNPC directive from xkas/asar to complement the existing ORG
directive. A common useful idiom is "WARNPC 0xXXXX\nORG 0xXXXX," which only
seeks forward and raises an error if you've already written to that part
of the file.
Fixes https://bugs.dolphin-emu.org/issues/10265 (Star Wars: The Clone
Wars hangs on loading screen with DSP-HLE and JIT Recompiler).
The Clone Wars hangs upon initial boot if this interrupt happens too
quickly after submitting a command list. When played in DSP-LLE, the
interrupt lags by about 160,000 cycles, though any value greater than or
equal to 814 will work. In other games, the lag can be as small as 50,000
cycles (in Metroid Prime) and as large as 718,092 cycles (in Tales of
Symphonia!).
All credit to @hthh, who put in a heroic(!) amount of detective work and
discovered that The Clone Wars tracks a "AXCommandListCycles" variable
which matches the aforementioned 160,000 cycles. It's initialized to ~2500
cycles for a minimal, empty command list, so that should be a safe number
for pretty much anything a game does (*crosses fingers*).
- Makes DSP-LLE code checksums the same as those from DSP-HLE. I'm
assuming DSP-HLE was doing it correctly, since there are numerous
references to these pre-endian-swapped checksums (including in
DSPHost.cpp itself).
- Fixes disassembly when dumping code from DSP-LLE, which was using the
wrong endianness and giving totally bogus output.
- Reveals error messages of the format, "Bah! ReadAnnotatedAssembly
couldn't find the file ../../docs/DSP/DSP_UC_AX_07F88145.txt," which
seems to be intended behavior that was previously hidden.
This change centralizes all of the path handling and file writing logic
in DumpDSPCode. DSP-HLE also gains the feature of DSP-LLE to
automatically disassemble dumped code and write it to an accompanying
text file.
With the relocation of DumpDSPCode to DSPCodeUtils, the only remaining
function in DSPLLETools is DumpCWCode. This function 1) is not used
anywhere (not even in DSPTool), 2) doesn't seem to really do anything,
and 3) has a single comment saying "TODO make this useful :p"
Stops CMake from saying "BlueZ NOT found, disabling bluetooth support"
on other OSes. Windows, macOS, and Android support Bluetooth using other
libraries. I'm not sure if non-Linux, non-Android Unices (like FreeBSD)
need another message?
Fixes warning:
```
Source/Core/DiscIO/NANDImporter.cpp:55:17: warning: format specifies type 'unsigned long' but the argument has type 'u64' (aka 'unsigned long long') [-Wformat]
file.GetSize(), NAND_BIN_SIZE);
^~~~~~~~~~~~~~
1 warning generated.
```
This fixes an error condition on macOS when HIDAPI calls
IOHIDManagerCreate and IOHIDManagerClose on different threads. The
error behavior is non-deterministic, but can cause EXC_BAD_ACCES and
kill the program.
Fixes an error with the CoreAudio backend, which apparently doesn't
allow you to set the volume before starting the stream:
```
59:31:087 AudioCommon/CoreAudioSoundStream.cpp:97 E[Audio]: error setting volume
```
This shouldn't cause any problems with other backends, since the mixer
starts with silence anyways.
The average user doesn't care, and for users who mix NTSC and PAL games
it avoids the "Memory Card is formatted for another market" message. For
non-average users, it's probably fine to have save data as separate
files anyways.
Might need some interface/string changes to explain what GCI Folder is
and why it's the default?
This PR attempts to turn on `-fdiagnostics-color` by default when using
the CMake Ninja generator.
Ninja effectively turns off colored messages by not running subcommands
in a pseudo-terminal. The Ninja maintainers have decided that using
pseudo-terminals has more downsides than upsides, but have helpfully
taught Ninja itself how to parse and remove color codes if its parent
isn't a (pseudo-)terminal.
Colored messages make it easier to read warnings and error messages in a
large build log, and are pretty.
Some widescreen hacks (see below) properly force anamorphic output, but
don't make the last projection in a frame 16:9, so Dolphin doesn't
display it correctly.
This changes the heuristic code to assume a frame is anamorphic based on
the total number of vertex flushes in 4:3 and 16:9 projections that
frame. It also adds a bit of "aspect ratio inertia" by making it harder
to switch aspect ratios, which takes care of aspect ratio flickering
that some games / widescreen hacks would be susceptible with the new
logic.
I've tested this on SSX Tricky's native anamorphic support, Tom Clancy's
Splinter Cell (it stayed in 4:3 the whole time), and on the following
widescreen hacks for which the heuristic doesn't currently work:
Paper Mario: The Thousand-Year Door (Gecko widescreen code from Nintendont)
C202F310 00000003
3DC08042 3DE03FD8
91EEF6D8 4E800020
60000000 00000000
04199598 4E800020
C200F500 00000004
3DE08082 3DC0402B
61CE12A2 91CFA1BC
60000000 387D015C
60000000 00000000
C200F508 00000004
3DE08082 3DC04063
61CEE8D3 91CFA1BC
60000000 7FC3F378
60000000 00000000
The Simpsons: Hit & Run (AR widescreen code from the wiki)
04004600 C002A604
04004604 C09F0014
04004608 FC002040
0400460C 4082000C
04004610 C002A608
04004614 EC630032
04004618 48220508
04041A5C 38600001
04224344 C002A60C
04224B1C 4BDDFAE4
044786B0 3FAAAAAB
04479F28 3FA33333
Michael Maltese